酒店、餐廳等場所開始廣泛使用自動感應門，因為這樣可以節約大家的時間，更關鍵的是美觀大方，讓我們從四個方面介紹了濟南感應門的工作流程。

Hotels, restaurants and other places have started to use automatic induction doors widely, because it can save everyone's time, and the key is to be beautiful and generous. Let's introduce the workflow of Jinan automatic induction doors from four aspects.

1、開門信號

1. Door opening signal

開門信號是自動感應門接觸到的信號。微波雷達是對物體位移的響應，適用于響應速度快、行走速度正常的人。其特點是在接近門的人不想離開時，自動感應門自動關閉，具有保護開門人的作用。紅外線傳感器對物體產生反應，無論人是否在移動，只要在傳感器的掃描范圍內就會有反應，發出接觸信號。

The door opening signal is the signal that is automatically sensed by the door. Microwave radar is a response to object displacement, which is suitable for people with fast response speed and normal walking speed. Its feature is that when people close the door do not want to leave, the automatic sensing door automatically closes, with the function of protecting the door opener. The infrared sensor reacts to objects. No matter whether a person is moving or not, as long as it is within the scanning range of the sensor, it will react and send out contact signals.

2、進入系統和非公共區域

2. Access to systems and non-public areas

濟南自動感應門性被廣泛適用于大型公共場所，所以會對自動感應門功能要求較高，進入系統是進入許可的標志。當識別或檢測到進入許可已通過時，向自動感應門控制系統發送開門信號。

Jinan automatic induction door is widely used in large public places, so it will have high requirements for the function of automatic induction door. The entry system is a sign of entry permission. When it is recognized or detected that the entry permission has been passed, the door opening signal is sent to the automatic induction door control system.

自動感應門須在鎖定狀態下才能發出開門信號。門禁系統包括簡單的按鍵開關、密碼鎖、磁卡鎖等。復雜的重量識別系統、指紋識別系統等。但不管系統多復雜，都要自動開門并傳遞接觸信號。為了防止無關信號的噪聲導致的誤接通，信號電路的屏蔽非常重要。

The door opening signal can only be sent out when the automatic sensing door is locked. The access control system includes simple key switch, password lock, magnetic card lock, etc. Complex weight identification system, fingerprint identification system, etc. However, no matter how complex the system is, it will automatically open the door and transmit contact signals. In order to prevent false connection caused by noise of irrelevant signal, shielding of signal circuit is very important.

3、解除

3. Release

自動感應門開啟采用電磁吸門、電子閂鎖和電子開門器。電子門受力方向不影響開門動作，不易引起誤操作。，另一種帶觸點開關的機械鎖，重鎖與開關合二為一，鎖不處于解鎖狀態，觸點無法接觸，不會發生誤操作。

Automatic induction door opening adopts electromagnetic door, electronic latch and electronic door opener. The force direction of the electronic door does not affect the opening action, and it is not easy to cause misoperation., Another kind of mechanical lock with contact switch, the re lock and the switch are combined into one, the lock is not in the unlocked state, the contact cannot be contacted, and no misoperation will occur.

4、集中控制

4. Centralized control

集中自動感應門的閉合狀態可以通過位置信號發送電路情況，可以使用接觸開關。到達位置后，開關可以由接觸信號觸發，也可以使用傳感器信號發生器在傳感器檢測門位置時發送信號。控制室裝有顯示自動感應門狀態的適當指示燈。集中操作通常同時打開或鎖定多個門，具體取決于是否存在與自動感應門控制器相對應的終端。

The closed state of the centralized automatic induction door can be transmitted through the position signal, and the contact switch can be used. After reaching the position, the switch can be triggered by the contact signal, or the sensor signal generator can be used to send a signal when the sensor detects the door position. The central control room is equipped with appropriate indicator lights to display the status of automatic sensing doors. Centralized operation usually opens or locks multiple doors at the same time, depending on whether there is a terminal corresponding to the automatic induction door controller.

本文介紹了濟南自動感應門的工作流程，簡要介紹了開門信號、進入系統和非公共區域、解除、集中控制等工作流程，這個功能可以很好地為我們節省很多時間，使用開始被廣泛的應用到公共場所。您有定制需求的話歡迎來我們網站http://m.52yoga.net咨詢！

This paper introduces the work flow of Jinan automatic induction door, and briefly introduces the work flow of door opening signal, entry system and non-public area, release, centralized control, etc. This function can save us a lot of time, and has been widely used in public places. Welcome to our website if you have customization needs http://m.52yoga.net consulting service