目前濟南感應門被廣泛地運用于各式各樣的場所中，在家庭中也是非常常見的，特別是在那些鄉村別墅里面，下面小編通過三點很常見的感應門故障分析，給大家深入介紹一下感應門。

At present, Jinan induction door is widely used in all kinds of places, and it is also very common in families, especially in those country villas. The following editor will give you an in-depth introduction to induction door through three common induction door fault analysis.

一：感應門門扇開關發生跳動

1： The door leaf switch of the induction door jumps

有些感應門在進行開關的時候，往往會有跳動的情況發生，這是什么原因呢？小編提醒大家，這種問題就是因?yàn)楦袘?yīng)門的軌道被東西給卡住了，要么就是因?yàn)榈踺喣抢锉粬|西給卡住了，總之就是因?yàn)橛挟愇镞M(jìn)入軌道，才會導致感應門發生跳動。

When some induction doors are opened and closed, they often jump. What is the reason? Xiaobian reminds you that this problem is because the track of the induction door is stuck by something, or because the lifting wheel is stuck by something. In short, it is because there are foreign objects entering the track that the induction door will jump.

二：感應門開關的時候速度很慢

2： When the induction door is opened and closed, the speed is very slow

不少感應門在使用了一段時間過后，難免會有速度過慢的情況，出現這一點情況的原因其實有很多，比如控制自動開關的控制器出錯了，感應門的皮帶使用時間過長而導致松動了，或者是運行的電壓有問題等。

Many sensing doors will inevitably slow down after being used for a period of time. In fact, there are many reasons for this, such as the controller controlling the automatic switch is wrong, the belt of the sensing door is loosened due to long service time, or there is a problem with the operating voltage.

三：感應門不能啟動打開

3： The induction door cannot be started and opened

如果一扇門不能啟動打開的話，那么它還叫做感應門嗎？有些感應門不知道為什么，突然就不動了，這一定是感應門出現了故障導致的，要么是開門傳感器故障，沒那么就是控制器有故障了，還有就是可能電源沒有接好，或者電路短路都有可能，感應門里面被東西卡住也會這樣故障原因有很多需要現場檢測。

If a door cannot be opened, is it also called an induction door? Some induction doors don't know why and suddenly don't move. This must be caused by the failure of the induction door. Either the door opening sensor is faulty, or the controller is faulty, or the power supply is not connected properly, or the circuit is short circuited. It's also possible that something gets stuck in the induction door. There are many reasons for the failure that need to be detected on site.

以上已經明確的知道了到底什么是感應門，還有感應門會發生的各種情況的原因，相信大家在日后生活中，如果遇到這里面三種類似的情況，便能盡快知道原因了，這樣找出的方法也會變得更快，有感應門售后需求聯系我們http://m.52yoga.net吧。

The above has clearly known what is the induction door and the reasons for the various situations that will happen to the induction door. I believe that in future life, if you encounter three similar situations, you can know the reasons as soon as possible, so that finding out the solution will become faster. If you feel the after-sales needs of the door, contact us http://m.52yoga.net OK.