感應門在高頻運行和長時間使用后，出現濟南感應門在開關時不流暢是什么原因呢？如何維修呢？

What is the reason why Jinan induction door is not smooth when it is opened and closed after high-frequency operation and long-time use? How to repair it?

（1）原因：開啟與關閉速度設定太慢；維修處理：調設開、關速度值（0~25級）

(1) Cause: the opening and closing speed setting is too slow; Maintenance treatment: adjust the opening and closing speed values (level 0-25)

（2）原因：開啟或關閉緩行距離設定值太大；維修處理：下調開啟或關閉緩行距離設定值（30mm/sec、50mm/sec、70mm/sec）

(2) Cause: the setting value of the opening or closing jog distance is too large; Maintenance treatment: lower the set value of opening or closing slow travel distance (30mm / sec, 50mm / sec, 70mm / sec)

（3）原因：玻璃門在關閉運行中受到外力（人或物）撞擊，造成控制器系統異常，出現了***運行會較慢；維修處理：通過移動（人或物）的出入等使傳感器工作，讓門體暫時關閉。

(3) Cause: the glass door is impacted by external force (person or object) during the closing operation, causing the controller system to be abnormal, and the first operation will be slow; Maintenance treatment: make the sensor work by moving (people or objects) in and out to temporarily close the door.

（4）原因：自動門軌道內有異物；維修處理：軌道內的異物。

(4) Cause: there is foreign matter in the track of automatic door; Maintenance treatment: remove foreign matters in the track.

（5）原因：門體下部的電磁鎖出現了松動；維修處理：把電磁鎖重新固定好。

(5) Cause: the electromagnetic lock at the lower part of the door body is loose; Maintenance: fix the electromagnetic lock again.

（6）原因：止擺器出現損耗或松動，使其接觸到導軌和鎖眼；維修處理：如果是松動（將其重新固定好）；如果是損耗（更換新的部品）。

(6) Cause: loss or looseness of the pendulum stopper causes it to contact the guide rail and keyhole; Maintenance treatment: if it is loose (fix it again); In case of loss (replace with new parts).

以上是關于玻璃自動感應門開關時不流暢和原因和維修處理方法。為了防止故障的發生，適時進行維修管理，定期進行部品的點檢，調整、更換是非常必要的。更多內容就來我們網站http://m.52yoga.net咨詢了解吧。

The above is about the causes and maintenance methods of the glass automatic induction door opening and closing. In order to prevent the occurrence of faults, it is necessary to carry out maintenance management in a timely manner, and regularly carry out spot inspection, adjustment and replacement of parts. Come to our website for more information http://m.52yoga.net Consult and understand.