感應門普及越來越廣，很多公共場合及辦公室都能見到它的身影，但如果感應門出現故障怎么辦呢？下面我們就來講講濟南感應門有“吱吱聲”異響怎么檢測？

The induction door is becoming more and more popular, which can be seen in many public places and offices. But what if the induction door fails? Now let's talk about how to detect the "squeak" of Jinan induction door?

檢測自動門扇的吊具滑輪有沒有反常

Check whether the lifting pulley of the automatic door leaf is abnormal

一般感應門的吊具滑輪，會因為長期運用的原因，會呈現必定的磨損，假如僅僅比較細微的磨損的話，處理起來比較簡單，能夠將滑輪和軌跡進行整理一次，然后將軌跡上面的塵埃打掃潔凈，當然也能夠給滑輪的軸承上少量的潤滑油，但在上潤滑油的時分，不要在感應門的滑輪和軌跡的外表增加潤滑油，這樣簡單粘附必定的塵埃，然后加劇損壞，別的也會使得滑輪呈現打滑現象。

Generally, the lifting tool pulley of the induction door will show certain wear due to long-term use. If it is only slightly worn, it is relatively simple to deal with it. The pulley and track can be sorted out once, and then the dust on the track can be cleaned. It can also give a small amount of lubricating oil to the pulley bearing, but when applying lubricating oil, do not add lubricating oil to the pulley and track surface of the induction door, In this way, a certain amount of dust is simply adhered, and then the damage is aggravated. Others will also make the pulley slip.

檢測感應門扇底部的地輪

Detect the ground wheel at the bottom of the induction door leaf

假如感應門下面的地輪發生了損壞或許是松動的話，也簡單呈現非常大的聲響，假如存在這樣的狀況的話，要立刻進行處理，處理方式是對地輪進行加固或許是從頭更換新的地輪。

If the ground wheel under the induction door is damaged or loose, it also makes a very loud noise. If such a situation exists, it should be handled immediately. The handling method is to reinforce the ground wheel or replace it with a new one.

如果出現上述性能以外的故障，如沒有摩擦聲，沒有爆破聲，門不動，這叫做莫名其妙的故障，那么先要檢查電源是否開啟，是否自動感應門開關是否關閉變壓器是否因電壓突然上升而損壞，如果不是上述故障，應先排除控制器，看是否有故障。如果控制器無故障，那么只剩下電動機，電動機是不容易的。損壞的部件，如果損壞，只能更換(更換前要排除減速器故障)。

If there is any fault other than the above performance, such as no friction sound, no blasting sound, and the door does not move, which is called an inexplicable fault, first check whether the power supply is turned on, whether the automatic induction door switch is turned off, and whether the transformer is damaged due to the sudden rise of voltage. If it is not the above fault, first remove the controller to see if there is any fault. If the controller has no fault, it is not easy to leave only the motor. Damaged components, if damaged, can only be replaced (the reducer fault should be eliminated before replacement).

如果你不了解，不要主動處理，要防止產生更多故障。對于機械故障，只要稍加用心，一般人員是完全可以處理的。更多相關內容就來我們網站http://m.52yoga.net進行咨詢吧！

If you don't understand, don't take the initiative to deal with it, and prevent more failures. For mechanical faults, ordinary personnel can handle them with a little care. More relevant content will come to our website http://m.52yoga.net Consult!